Compared with the traditional UV power supply (UV transformer + UV capacitor), the intelligent UV power supply has become a new technology that can completely replace the traditional UV power supply due to its high efficiency, energy saving, advanced functions, small size, light weight and high reliability. power supply. Intelligent UV power has become the favorite choice of many industries such as UV curing industry, printing industry, furniture industry, etc., and is favored by customers. Today we walk into the world of smart UV power and learn about its application in the UV curing industry.

 

First let's take a look at the features and benefits of smart UV power and see why it is so popular.

 

    1. High-frequency square wave technology (18KHZ square wave output): 20%~30% UV energy output is increased compared with traditional power supply; it can work in flash mode to reduce energy consumption.

 

    2, soft switch start system: extend the life of the lamp, greatly reduce the start-up time (about 45 seconds).

 

    3, single-chip dynamic control technology: make the power conversion efficiency the highest; automatically find the best working voltage and current of the lamp; real-time monitoring, automatically adjust the working parameters of the lamp.

 

    4, high-speed IGBT and soft switching technology: fast response; from standby to full power output time: 8ms!

 

    5, power amplitude modulation technology: the output power is steplessly adjustable; the minimum power in the long-term standby state is only 10%.

 

    6, phase balance technology: power factor 96%, no inrush current.

 

    7, self-test and circuit protection technology: there are self-test functions, various circuit protection measures.

 

    8. Excellent mechanism design technology: The weight is 1/5 of the traditional power supply; the volume is 1/8 of the traditional power supply, and the installation is simple and convenient.

 

    Then let's take a look at the point of attention when using the smart UV power supply to avoid similar errors, causing the entire UV curing device to stop working.

 

    The first step is the operation steps. It must be carried out according to the instructions. It cannot be operated casually. Otherwise, it will cause mechanical failure, damage the service life of the equipment, and seriously damage the equipment.

 

    Secondly, the parameters of the UV lamp should be matched with the power supply, or the parameters of the tube voltage and current of the UV lamp should be informed to the manufacturer when purchasing the intelligent UV power supply, and they should be matched to the power supply parameters. If the parameters between the lamp and the power supply do not match, I believe everyone knows that the probability of equipment failure will be great, so pay attention to this.

 

    Another point is to pay attention to the daily maintenance of the intelligent UV power supply, can not let the power supply overload operation, failure, etc. to find a professional to repair, do not arbitrarily disassemble.